FW-300i Bracket Installation

Before proceeding, please read and observe all instructions and warnings in the guide. Do a thorough check of all the items in the boxes for any missing or damaged items. If any of the items are missing or damaged, DO NOT INSTALL OR OPERATE THE UNIT. Please contact BLiNQ Networks for assistance instead.

This installation guide contains information for the FW-300i Intelligent LTE Base Station. Installation should only be done by licensed and bonded installers/technicians. Any installer or technician working with these units must read this installation guide in its entirety.

Please proceed to download the document attached

• Related Articles

• FW300i Quick Installation Guide Release

  A quick overview on: System Parameters FW300i Setup Installation Configuration EPC Setup Configuration CPE Setup Installation Configuration KPIs Troubleshooting Please proceed to download the document attached.

• FW-300i User Manual and Configuration Guide

  This manual contains informational and overview chapters and then continues as a guide to the recommended order that you configure and then monitor your FW-300i system. There are two methods to configure the FW-300i: FW-300i Web-based User Interface ...

• FW300i Tower Installation Schematic Representation

  FW-300i tower installation schematic representation provides a quick reference for the RF technicians and engineers on how to install the FW300i intelligent LTE base station on the tower.

• FWC-122HG-35 Quick Installation Guide

  Please find attached a handy, versatile, and comprehensive cheat sheet or quick installation guide, primarily intended to support installers during initial deployment and troubleshooting during CPEs setups.

• Moonflower Brochure

  Click on the file below to download a copy of the Moonflower brochure.