FWC-122HG-35 CPE User Manual

FWC-122HG-35 CPE User Manual

Before proceeding, please read and observe all instructions and warnings in the guide. Do a thorough check of all the items in the boxes for any missing or damaged items. If any of the items are missing or damaged, DO NOT INSTALL OR OPERATE THE UNIT. Please contact BLiNQ Networks for assistance instead.

This installation guide contains information for the FWC-110-35 CPE. Installation should only be done by a licensed and bonded installers/technicians. Any installer or technician working with these units must read this guide in its entirety.

The purpose of this document is to help define the product (both hardware and software) specifications of the FWC-110-35 CPE. It also serves as a guide in the process of installing and configuring the CPE. Please proceed to download the attachment.

    • Related Articles

    • FWC-110HG-35 CPE User Manual

      Before proceeding, please read and observe all instructions and warnings in the guide. Do a thorough check of all the items in the boxes for any missing or damaged items. If any of the items are missing or damaged, DO NOT INSTALL OR OPERATE THE UNIT. ...

    • CAT 6 High Gain - FWC-110-35 HG CPE Antenna patterns

      Summary : This article consists of antenna pattern files for BLiNQ FWC-110-35 HG CPE The antenna pattern file is a simple pafx , msi or xml file that describes the main characteristics of the antennas - radiation patterns, gain, frequency range, ...

    • What is the default username and password to login to BLiNQ CPE's?

      Summary : Article Outlines the default username and password to access BLiNQ CPE's. Question : What is the default username and password to access BLiNQ CPE's? Customer Environment : Customer using BLiNQ CPE's and requiring access to the BLiNQ CPE's. ...

    • FW-300i User Manual and Configuration Guide

      This manual contains informational and overview chapters and then continues as a guide to the recommended order that you configure and then monitor your FW-300i system. There are two methods to configure the FW-300i: FW-300i Web-based User Interface ...

    • FWC-110HG-35 CPE Datasheet

      FWC-110HG-35 CPE IS A CATEGORY 6 LTE CPE SUPPORTING BLINQ MASSIVE MIMO FW300I/600 SOLUTION. Here are some key features: Supports TDD-LTE Mode Band 42, 43 & 48 * Supports 3GPP Release 10 compliant (Support Cat 6; 40MHz Aggregation)/Future Rel 11 ...